ProAcid acid cleaner restores the new appearance to ceramic tile and grout. Hard water deposits, grout haze, efflorescence, and soap scum melt away leaving a sparkling bright new appearance.
Shake bottle before diluting. For moderate soil dilute 5 to 1. Increase concentration according to severity of soil. As with all cleaning agents pre-test at ready to use dilution before using. This is a highly concentrated three-phase product that may appear cloudy when cold. When diluted with warm water the product becomes clear.
Protect by masking off metals and surfaces not intended for treatment.
Apply ProAcid solution with a sprayer, sponge, or mop.
Agitate by scrubbing with brush or floor machine.
Remove by using a wet/dry vacuum, damp mop, or sponge then neutralize with Heavy Duty Pro Clean solution.
Rinse area thoroughly with clean water then vacuum or wipe dry.
Rinse and clean your equipment.
Remove masking from protected surfaces.
Seal grout to protect against stains and discolorations.
Clean regularly with pH Neutral Cleaner to maintain that sparkling new appearance.
6142C PRO ACID
PRO ACID - GAL, CTI