Description
<<<DISCONTINUED ChlorX is a highly active bleach neutralizer.
Dilution: 3 oz. ChlorX into 8 oz. Water.
USAGE:
- Flood the bleached spot with water and vacuum dry.
- Repeat this process at least 3 times to remove as much contamination as possible.
- Thoroughly soak the bleached area with ClorX solution and allow 3 minutes dwell time prior to your color restoration.
- Very important: Remove as much moisture as possible before you begin your color restoration.
As with all cleaning chemicals pre-test your procedure in an inconspicuous area prior to using.
CHLORX BLEACH NEAUTRALIZER - 10 OZ, CTI
Related Products
Related Products
ENERGY - GAL, CTI<<<DISCONTINUED
PRO'S CHOICE
<<<DISCONTINUED Energy is a solvent booster that increases the cleaning detergents ability to separate oily/waxy/gummy soils from synthetic fibers. When used as an additive to a good...
60017
DISCONTINUED>>>INSPECTION TUNNEL, CTI
PRO'S CHOICE
DISCONTINUED BY MANUFACTURER The secret to successful odor removal is in accurately locating all the odor sources. To this end CTI has designed the “Inspection Tunnel”. Now you can locate...
60067
COLOR MODIFYING COSMETICS (CMC), CTI<<< DISCONTINUED
PRO'S CHOICE
DISCONTINUED>>> Color Modifying Cosmetics" offer cleaning technicians a friendly way to deal with bleach spots without resorting to liquid dyes or repair tools. USAGE: When restoring...
60010
Out of stock
FILTRATION SOIL REMOVER - FSR - 10 OZ, CTI
PRO'S CHOICE
$14.00
FSR removes the extremely fine chemical and particulate soil which accumulates along perimeter areas. A sophisticated blend of solvents, surfactants, and builders quickly break down and suspend these...
60025
PRO HONE 800 - 10 OZ TUB, CTI
PRO'S CHOICE
Pro Hone 800 hones away scratches and wear patterns from marble and travertine leaving the ideal matt finish. Follow this process with Pro Polish to bring the stone to a brilliant shine if desired...