BRUSH & BONNET - GAL, CTI

Pro's Choice Soil Crystallization  products are the cutting edge of low moisture technology for professional cleaners. 

Brush & Bonnet is designed to be used for (spray and brush) and (bonnet cleaning) procedures.

Usage:

Dilution:

For heavy soil use a dilution ratio of 16 to 1 that's 1 cup per gallon of water.  For maintenance cleaning use a dilution of 32 to 1 or 4 ounces per gallon of water.  To add additional brightening power to Brush & Bonnet boost your ready to use solution with a pint of APE Cleaning Catalyst.

Directions:

Thoroughly vacuum area to be cleaned.

Spray and Brush procedure: Brush & Bonnet may be applied using a rotary shampoo machine or using a pump type sprayer.  Apply solution to carpet evenly then brush carpet to emulsify soil.  Allow carpet to dry completely then vacuum carpet thoroughly to remove encapsulated soil.

Bonnet Extraction cleaning procedure:

Work in sections of approximately 100 square feet (10 x 10).  Using a pump sprayer evenly apply solution to the area.  With a rotary “dry cotton” bonnet buff the area to extract the soil and solution into the bonnet.  Any residual that remains will dry to a non-sticky crystal, which will be removed during normal vacuuming.

Wet Bonnet procedure:

Submerge cotton bonnet in Brush and Bonnet solution.  Wring well and buff carpet surface in overlapping pattern.  Rinse and wring bonnet frequently.

SDS

BRUSH & BONNET - GAL, CTI